Interface Connection & Installation introduction Hollyland Tech September 09, 2022 10:43 OVERVIEWS: Mars 4k has rich interface, this article shows the usage of all the interface for your reference. Transmitter Connection No. Status Detail ❶ Mirrorless camera SONY, Canon, Fujifilm, Nikon and others ❷ Camera Panasonic, SONY ❸ Professional video camera ARRI、RED、SONY ❹ USB charger The charger must be 5V2.5A or above, 5V1A/2A power supply is insufficient, and device will not work properly ❺ USB flash drive Upgrade via USB C flash drive / USB flash drive+ Type C conversion ❻ 1/4 Cold shoe The device can be mounted on the hot shoe mount of the camera ❼ NP-F Battery F970，F750，F550 ❽ D-Tap adapter cable Able to connected to V-Mount/G-Mount battery ❾ 12V DC adapter All Mars Series wireless transmission DC adapters are common Receiver Connection No. Status Detail ❶ Monitor Small or large monitor are supported ❷ Switcher/director BMD、SONY、Panasonic and other switchers are supported ❸ Video capVideo capture card/encoder Supported by all capture cards ❹ USB charger The charger must be 5V2.5A or above, 5V1A/2A power supply is insufficient, and device will not work properly ❺ USB flash drive Upgrade via USB C flash drive / USB flash drive+ Type C conversion ❻ Tripod The receiver (RX) must be on tripod, at least 1.7 meters high, to avoid obstruction ❼ NP-F Battery F970，F750，F550 ❽ D-Tap adapter cable Able to connected to V-Mount/G-Mount battery ❾ 12V DC adapter All Mars Series wireless transmission DC adapters are common Article Number: 【AS-220824001_6】 Related articles How to scan channels on Mars 4K? How to get the best wireless performance with Mars 4K How to connect Mars 4K to PC to live streaming? How to pair a new receiver with the system ? Mars 4K how to enter scene mode, and how to use it? Comments 0 comments Article is closed for comments.