Button & Interface

OVERVIEWS: The solidcom C1 has rich keys and interfaces, Getting the functions of all buttons and interfaces can help you use your device better, please check more details of the button and interfaces in the below article.

BASE STATION:

INTERFACE&BUTTON	FUNCTION DESCRIPTION
❶ Volume Knob	Adjust master headset's volume
❷ LCD Screen	Display work status information of the headset and the HUB
❸ Menu Button	Long press the center button to enter Menu
❹ AB Group Button	The orange light indicates that you have entered the current group, you can【Listen & Talk】in that Group
	No light indicates that you have not Entered or been Assigned to that  group, so you can't 【Listen & Talk】in that group
	【Click】the group button to【Enter/Exit】the group
❺ 3.5mm Headset Interface	TRRS interface supports ordinary 3.5mm headset connection （We recommend to use our official wired headset, other earphones may have some ground noise）
❻ USB Upgrade/Pair Interface	Upgrade interface (USB disk), pair the headsets with the HUB  (USB Cable)
❼ Announce Button	Hold this button can broadcast information to all headsets involved, meanwhile, the headsets will be turned mute
❽ NP-F Battery Plate	Support NP-F battery to power the HUB (NP-F970, F750, F550)
❾ V-Mount/G-Mount Battery Plate	Support V-Mount and G-Mount battery to power the HUB

INTERFACE	FUNCTION DESCRIPTION
❶ TNC Antenna Interface	1.9GHz Antenna
❷ 12V DC Power Interface	12V DC Power Supply
❸ TypeC USB Interface	UAC Interface, allowing direct connection with computer
❹ HUB Power Button	Power Switch
❺ 3PIN XLR Audio Input Interface	Support PGM signal input
❻ 3PIN XLR Audio Interface	Connect to 2W wired intercom systems, such as Clear-Com and RTS
❼ RJ45 Network Interface (Digital Signal)	Support standard TCP/IP protocol, digital signal IP interconnection
❽ RJ45 Network Interface (Digital Signal)	Support standard TCP/IP protocol, digital signal IP interconnection
❾ RJ45 Network Interface (Analog Signal)	Support standard 4W analog audio protocol for connection  with 4W compatible systems, such as Clear-Com or RTS

HEADSET:

INTERFACE/BUTTON	FUNCTION DESCRIPTION
❶ A, B Group Button	Switch between A and B group calls(Click)
❷ Volume Button	Adjust the volume of the headset
❸ Switch Button	Power switch
❹ Type-C USB Interface	Upgrade & Pair
❺ Battery Compartment	Battery installment
❻ Work Status Indicator	Steady Green Indicator=》Normal work state. Talk and listen enabled
	Green Indicator Flashing=》No connection
	Red Indicator Flashing=》Low battery, need to replace the battery