Installation---Mars Series Hollyland Tech June 16, 2021 02:20 Updated Overview: This article is about the installation suggestion for the MARS series Products. OPERATION: Connect the TX to the camera with an HDMI or SDI cable Power the device with a DC adaptor or battery or Type-C adaptor(5V 2A). Install the Receiver 1.7m above the ground. Turn on the Receiver and select the feature Channel Scan to check the status of channels. Then choose one Clean channel on Transmitter. Multiple Sets Installation: Suggest using up to 3 sets of MARS systems at the same time. Choose a different channel, and the channel interval should bigger than 2, please use the channel scan function on the RX to check the status of channels, then select a clean channel on the TX. Place each RX at least 0.5m away from the other. Related articles Hollyview APP Connection Detailed Comparison---Mars Series MARS 400S Guidance With Panasonic GH4 Check&Change--- Wi-Fi Password Installation---Cosmo Series Comments 0 comments Article is closed for comments.