How to Manage Solidcom C1 Pro Groups? Hollyland Support March 09, 2023 00:57 Updated The Solidcom C1 Pro supports group A and B settings. Connect your computer to the hub via the RJ45 interface and enter the settings page on the web server, or perform group settings in the Solidcom app directly on your mobile device. Browser-based settings Select the Network option in the menu interface. Then, the default IP address, username, and password are displayed under Wire Network Setting. Connect the computer to the hub through the RJ45 interface. Set the IP address of the computer as 192.168.218.XXX and the default IP address of the hub to 192.168.218.10. Open a browser on the computer and visit http://192.168.218.11 to enter the configuration page for the hub. Related articles How to upgrade the Solidcom C1 Pro HUB ? How to connect multiple sets of Solidcom C1? Can the Solidcom C1 and Solidcom C1 Pro Work Together? Is the ENC Function Still Available? How to pair the new intercom headset? How to Use the UAC Function? Comments 0 comments Article is closed for comments.
The Solidcom C1 Pro supports group A and B settings. Connect your computer to the hub via the RJ45 interface and enter the settings page on the web server, or perform group settings in the Solidcom app directly on your mobile device. Browser-based settings Select the Network option in the menu interface. Then, the default IP address, username, and password are displayed under Wire Network Setting. Connect the computer to the hub through the RJ45 interface. Set the IP address of the computer as 192.168.218.XXX and the default IP address of the hub to 192.168.218.10. Open a browser on the computer and visit http://192.168.218.11 to enter the configuration page for the hub.
Connect the computer to the hub through the RJ45 interface. Set the IP address of the computer as 192.168.218.XXX and the default IP address of the hub to 192.168.218.10. Open a browser on the computer and visit http://192.168.218.11 to enter the configuration page for the hub.
Open a browser on the computer and visit http://192.168.218.11 to enter the configuration page for the hub.