Upgrade for Mars M1 Hollyland Tech November 28, 2022 07:40 Updated 1. Kindly Note It takes a risk to to do the upgrade, please avoid updating during important events; Please make sure the device with enough power during updating; Please don`t unplug the USB flash disk during updating to avoid updating failure; Please feel free to contact us if the updating failure or error causes the malfunction: Hollyland Technical Support Engineer: support@hollyland-tech.com 2. Updating Tool USB-C Cable Download Upgrade File --> Download Path 3. Upgrade Steps Format the USB flash disk into FAT32 format first, then place the updating file in the USB flash disk root directly. Insert the USB flash disk into the wireless monitor`s Type-C port, the monitor will enter the updating status automatically. Then just waiting for the update completion. 4. Special notes The USB flash disk needs to be formatted into the FAT32 format first so can the device to recognize the USB flash disk. If the USB flash disk which over 32G, the Window/Mac system don't have the FAT32 options, so need professional disk software tools (like DiskGenius) to format it. The updating file needs to be placed in the USB flash disk root directory can the device read the updating file, the file can't be placed in another folder. Checking whether the monitor firmware version is the latest or not on the device information after the update is completed. Related articles Firmware Upgrade Interface Connection & Installation introduction UPGRADE What are the Function ICONS at the bottom of Mars M1? Does Mars M1 supports decimal / fractional video format? Comments 0 comments Article is closed for comments.