How to connect Lark M1 to a camera? Hollyland Tech November 20, 2022 09:30 Updated 1. Operation steps (1) Connect Lark M1 to the camera via the [3.5mm OUT] interface by the 3.5mm [TRS to TRS] cable. (3) Set the camera volume: set the Camera Recording Volume to the lowest. SONY Canon Fujifilm Level 1 1 Block -26dB (3) Set Lark M1's volume to the right level [1~3 Level]. For example, for Sony cameras, ① Lark M1's audio output jack ② Camera's audio input jack ③ Camera's audio monitoring jack Note: there are two 3.5 mm audio jacks on the camera, one for audio input, and one for monitoring audio. Be careful to avoid connecting Lark M1 to the audio monitoring jack. 2. Audio Result Examples Sony Camera Record Volume: 15 Lark M1: Default Sony Camera Record Volume: 1 Lark M1: Default The white noise of the 2nd picture is lower than the 1st when comparing these two pictures. Related articles How to connect Lark M1 to a smartphone? How to connect Lark M1 to a computer? Lark M1 Introduction How to remove loud background noise when using Lark M1 with a phone? What is the Noise Cancellation function? Comments 0 comments Article is closed for comments.