How to use webserver to set up the base station? Hollyland Tech August 22, 2022 09:46 Updated Please do the operations as below to get how to use the webserver function： METHOD 1: Step1: Please connect the device to the PC as below Step2: Please enter the base station's menu page, check the IP information under the Network options, then set the IP address on the same segment as the device on the PC side, please check the picture below to get how to do that. Step3: Enter the device's IP address on a browser like Google Chrome Step4: Enter the Username and Password Username: admin Password: 12345678 METHOD 2: Step1: Please turn on the wifi function of the device. Then connect the WIFI on PC. Step2: Enter the device's IP address 192.168.217.100 on a browser to set up the device. Note: The Solidcom C1 WIFI is work in 5GHz, so only the PC which support 5GHz WIFI can connect it. Related articles How to upgrade Solidcom M1 to the latest firmware V220.127.116.11? How to connect mutiple sets of Solidcom M1 in the same place? APP Connection How to pair the new beltpack? How to use the Group function? Comments 0 comments Article is closed for comments.